Supply, installation, maintenance and certification of fire protection systems for industrial, commercial and marine environments — from portable extinguishers to engineered suppression systems for kitchens, engine rooms and flammable-liquid risk, backed by OEM partnerships and dated digital certification.
Industrial, commercial and marine sites carry different fire risks under the same roof — kitchens, machinery spaces, tank farms, control rooms. We supply, install, maintain and certify the full range of protection each hazard calls for: portable and fixed extinguishers charged with ABC dry chemical, CO2 or AFFF foam, R-102 suppression systems for commercial kitchens, Sea-Fire FM-200 systems for vessels, and foam systems for flammable-liquid risk.
Every installation is backed by our OEM partnership with Kidde Fire Systems and serviced to NFPA, BS EN and IMO standards, so your fire safety certificate stays current and every cylinder, nozzle and control head is accounted for at inspection.
From portable extinguishers to engineered suppression systems — the technologies our technicians install and service most.
Supply, installation, inspection and certification of portable and fixed extinguishers charged with ABC dry chemical, CO2 or AFFF foam, hydrostatically tested and recharged to NFPA 10.
Wet-chemical R-102 systems installed over hoods, ducts, plenums and cooking equipment, engineered to NFPA 96 and UL 300 to knock down grease fires before they spread.
Clean-agent FM-200 detection and suppression for engine rooms and machinery spaces aboard vessels and platforms, certified under IMO MSC/Circ.848 and SOLAS.
%20Hangar%20Deck%20fog%20foam%20firefighting%20station.JPG?width=500)
AFFF and foam-based systems engineered for tank farms, machinery spaces and flammable-liquid process risk, tested to NFPA 11 and EN 13565.
A fixed sequence every facility goes through, from first survey to signed certificate.
Technicians map fire risk by zone — kitchens, machinery spaces, tank farms — against applicable NFPA, BS EN and SOLAS requirements before design begins.
Extinguishers, suppression systems and foam networks are installed, pressure-tested and commissioned by OEM-trained technicians.
Cylinders and systems are hydrostatically tested, recharged and pressure-verified at our full-service workshops or via mobile units on site.
Every unit is tagged, dated and photographed, with a digital certificate issued on completion, meeting ISO 9001 and flag-state requirements.
Portable fire extinguishers
Ventilation & fire protection of commercial cooking
Fixed gas fire-extinguishing systems
Fire protection, detection & extinction
Send us your facility's fire safety equipment schedule and certificate dates — we'll plan the inspection, testing or recharge around your operating window, not the other way around.
Schedule an Inspection
